Unlock Instructions

How to Enter Unlock code in Your Samsung & Troubleshoot For Non Working Codes

 
Instructions: Read This First


* With the provided Unlock codes, if you are receiving "Code Error" or "Sim Network Unlock Unsuccessful,  DO NOT WORRY!  proceed to the "Trouble Shooting" section on how to proceed.
* Make sure "Airplane Mode" and "Wi-Fi" is turned off under wireless connections if your Samsung is an Android device.


There are Multiple Unlock Codes Above, which One is it?

If you only received 1 Unlock Code, Don't worry about this part, use the code provided above.

* Unlock Code is  the  Network=xxxxxxxx is the Unlock Code as shown below:

Example:

NETWORK=xxxxxxxx; PROVIDER=xxxxxxxx; SUBPROVIDER=xxxxxxxx; DEFREEZE=xxxxxxxx

* You can ignore the rest of the codes, unless you are receiving a "Phone Freeze" message when trying to input the Unlock Code.

 
Code Input Instructions


How to Enter Unlock Codes on all Samsung Models


Different phones have different Unlock Code Input Instructions, Try the following Instructions in Order:

 

Method #1 Insert a Non accepted simcard in your phone and power on. Once finished loading your phone will ask you to enter a code, enter the Unlock Code

Note: Non Accepted Simcard is any simcard not from the original provider

OR

Method #2 Go to the dial screen on your phone as if you are going to make a call and press: #7465625*638*UNLOCKCODE# (8 digit unlock code)

OR

Method #3 Go to the dial screen on your phone as if you are going to make a call and press: #0111*UNLOCKCODE# (8 digit unlock code)

OR

Method #4 Go to the dial screen on your phone as if you are going to make a call and press #7465625*638*# Once prompted for code, enter the 8 digit Unlock Code.


If Phone says, "Code Accepted" or "Network Unlock Successful" or "Not Yet Personalized" your phone is fully Unlocked

 

*If you are not receiving any signal after unlocking, make sure your wireless connections are turned on after unlocking the phone. Also pull the battery and restart phone.


How to Enter Defreeze Code for "Phone Freeze" Samsung Devices (only if your Samsung is Hard locked)

1.Input a non-accepted simcard into the phone.
2.Proceed to the dial screen.
3.Enter the defreeze code (Freeze code) and press enter, or okay.
4.The screen should now ask for the unlock code (Network Code).  Enter the 8 digit unlock code and hit enter.

OR

1. Turn phone on with an unaccepted simcard
2. Screen will display “Phone is freeze / SOS”
3. Type the unfreeze code (Nothing will show on screen)
4. Hit the “Enter Button”
5. Phone will ask for the Network lock code
6. Enter it as you have received it
7. Phone will be unfreeze and unlocked


How do I know my Phone's Network is Fully Unlocked?

Go to the dial screen on your phone, and press *#7465625#
 
A menu will be displayed that will resemble the following...

1. [ ] Network lock
2. [ ] Subset lock
3. [ ] SP lock

If everything if OFF, then your phone is fully unlocked.

 
Trouble Shooting

"Phone Freeze" Message What do I do?

Phone freeze is a result of the incorrect code being inputted incorrectly too many times, which means your Samsung device is Hardlocked.  You will require a Defreeze code and a Network Code to Unlock your phone.

* If you received multiple codes from us in the format below, use the Phone freeze instructions above.

Example:

NETWORK=xxxxxxxx; PROVIDER=xxxxxxxx; SUBPROVIDER=xxxxxxxx; DEFREEZE=xxxxxxxx

* If you received a Single code from us, you only have the network code.  If you are receiving the "phone freeze" message, you will require a Defreeze code from one of the manufacturer methods.  You can contact us directly regarding this.


"Code Error" or "Sim Network Unlock Unsuccessful" What do I do?

* Please check your IMEI number by pressing *#06#, this is the most common reason the code doesn't work.  If the first 15 digits which appear is different from the 15 digit IMEI number provided above, please reply directly to this E-mail.
 
Otherwise try the following below:
 

Solution #1

(Samsung Galaxy S2, S3, Note , Note 2)

Follow these step carefully, as long as you have the correct code it will work 100% (Your phone must be updated to the latest firmware!)

1. Please trouble shoot as usual with the customer, the code must be correct and the phone MUST prompt for the code.

2. If nothing we can proceed to use the "release method" on the phone(s):

a. Go to the Dial pad and dial *#197328640#

b. Please click on number [1] UMTS > [1] Debugging screen > [8] Phone Control > [6] NETWORK LOCK

c. You will see 3 options

d. Please click on number [1] Perso Sha256 INFO, the screen will change slightly

e. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen

f. Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message

g. Restart the phone on the screen by holding the power button and click RESTART

h. When the phone prompts for the unlock code simply enter the unlock code

i. Your phone is now permanently unlocked!

(Samsung Galaxy S4 Only)

Follow these step carefully, as long as you have the correct code it will work 100% (Your phone must be updated to the latest firmware!)
1. Make sure that the phone PROMPTS for the code with a NON accepted sim card and that your IMEI is correct by dialing *#06#
 
a. Go to the Dial pad and dial *#0011#
 
b. Please click your MENU button (Bottom LEFT button) and click BACK on the menu that appears, Nothing will happen do not worry please move to the next step
 
c. Please click your MENU button AGAIN and this time click KEY INPUT

d. When the Key input box appears please input the number "1" and hit OK

e. You will see a number 1 for a while, please wait until it changes into the SERVICE MENU
 
f. Please click [1] UMTS > [1] DEBUGGING SCREEN > [6] Phone Control > [6] Network LOCK

g. You will see 3 OPTIONS within Network LOCK

h. Please click on number [1] Perso Sha256 INFO, the screen will change slightly
 
i. Please hit the MENU button then when the menu pops up please carefully hit BACK to return to the previous screen
 
j. Next Please click on number [2] Perso Sha256 ON, the screen will change again to a one line message
 
k. Restart the phone on the screen by holding the power button and click RESTART
 
l. When the phone prompts for the unlock code simply enter the unlock code provided to you
 
m. Your phone is now permanently unlocked!
*If this is not working, go to Solution #2
 

Solution #2

Follow these step carefully, as long as you have the correct code it will work 100%

1. Power off and on your phone with different network sim card. "SIM network unlock PIN" or "Enter Network Lock Control Key" screen will appear.

2. Type your Unfreeze code (MCK code) and hit Unlock button. You will get "unsuccessful message" again but don't worry.

3. Now type the Unlock code (Network or NCK code) and hit Unlock button.

*If phone say "Network Lock Succesful" it worked, but if not, proceed to step 4.

4. If you get "unsuccessful" again then hit Dismiss button and type *2767*3855# on phone keypad.   (CAUTION! This will reformat all your data!)

5. After phone restarts, type the Unfreeze code (MCK code) when prompted to enter "SIM network unlock PIN" or "Enter Network Lock Control Key" screen and hit unlock button.

It will say "unsuccessful" again, don't worry!

6. Type the Unlock code (Network or NCK code) and hit Unlock button.

7. Your phone should now give you the message "Network Lock Successful"

Now your phone is successfully unlocked!

*If this is not working, go to Solution #3


Solution #3

1. Turn off the Wi-Fi on your phone and then turn device ON without SIM card.

Once it's on go to phone dial screen and DIAL: *7465625*638*#
it will bring you to the NETWORK LOCK screen.

- in MCC/MNC field enter code for the service provider your phone is originally from (eg 31026 for T-Mobile USA)

check here for list of codes: http://en.wikipedia.org/wiki/Mobile_Network_Code

*If your network has more than one mcc/mnc please try all of them this is very important

- in CONTROL KEY field enter the UNLOCK code
- hit OK
- you should get a message: LOCK SUCCESSFUL

Power phone down, insert SIM card you want your phone to work with and power on.


 

I can make Calls and Text but I'm not getting Internet Service.

In this case you will need to adjust what's called the APN settings.  The APN settings vary depending on the service provider you are trying to use.  Please contact your service provider and they can assist you setting this up.  There is no separate unlock for data or internet.  If you can call or text, your phone's network is fully unlocked.


 

My Phone is asking for the "PUK" or "Security Pin" or "Password"

If your phone is asking for one of the above, it is the Simcard personal password or phone security password NOT the Network Lock which we provide for you.  You can contact your service provider for this.  Once you bypass this, you can use the Network Unlock Code provided by us.
 

My Phone seems to be unlocked but I'm not getting any signal:

First of all, we do request you contact the service provider to make sure after unlocking your device, your unlocked phone will be compatible on their network.  Not all GSM phones are compatible with any Network after unlocking it.  The unlocked phone must be able to support the Network's Frequency.  If you are unsure of this, please contact them regading this.

After unlocking your phone, please pull the battery for a couple minutes and then restart the device.  It may take a few minutes for your phone to pick up the new signal. Also go to your Network settings on your phone, and make sure the device can detect the signal from the simcard you are trying use.

 
Alternative Code Input Instructions
.
Follow these step carefully, as long as you have the correct code it will work 100%
1. Power off and on your phone with different network sim card. "SIM network unlock PIN" or "Enter Network Lock Control Key" screen will appear.
2. Type your Unfreeze code (MCK code) and hit Unlock button. You will get "unsuccessful message" again but don't worry.
3. Type the Unlock code (Network or NCK code) and hit Unlock button.
4. If you get "unsuccessful" again then hit Dismiss button and type
*2767*3855# (CAUTION! This will reformat all your data!)
on phone keypad. Now wait until the phone is restarted. This operation will erase all data in your phone!
5. Now type the Unfreeze code (MCK code) when prompted to enter "SIM network unlock PIN" or "Enter Network Lock Control Key" screen and hit unlock button. It will say "unsuccessful" again, don't worry!
6. Type the Unlock code (Network or NCK code) and hit Unlock button.
7. Your phone now give you the message "Network Lock Successful"
Now your phone is successfully unlocked!

How to Enter Unlock Codes on an AT&T / Cingular BlackJack

1. Insert NON Cingular/AT&T SIM into device

2. Power on the device
   - Wait approximately 30 seconds until the Sim Lock application appears (the delay may be longer if the user has already attempted an unlock with the wrong code)

3. Enter the unlock code in the blank field

4. Press Ok
   - If the unlock code is incorrect, an error dialog will appear.  After pressing Ok on this dialog, the user has to re-enter the unlock code after delays (see above in Device Specific Information)
   - If the unlock code is correct, a success dialog will appear.

5. Press Ok
   - The device is now unlocked and should continue booting

OR

1.   Insert disallowed simcard (a simcard that the phone does not usaully accept) and enter unlock codes when prompted

2.   NOTE: If you are unable to connect to service provider or unable to make out going calls or recieve messages, this has nothing to do with your phone being locked or not, you need to force the BlackJack to change to GSM mode, this can be done as follows:

Power on your Phone

Enter *#1546792*#

Select Option 3 Network & Call Settings

Select option 5 Network Mode

Select GSM

 

Without sim alternative i607 / Blackjack

 

Power on without sim, you will then get a message saying "SIM Failure" at the top of the screen.

Click "Done" then press the green button to get into the dial pad. Type in #7465625*638*

Then it will display "Enter Network Control Key" this is where you enter the 8 digit unlock code. Then click ok

Your phone is now unlocked  


Samsung Unlock Code Instructions:

 
Model : Samsung U900(soul), F480, F490, J700, Z105, Z107, T919, T929

Unlock code is composed like this: #7465625*638*CODE#

1. Press the # button on the keypad 1 time to display #
2. Type 7465625
3. Press the star (*) button on the keypad 1 time
4. Type 638
5. Press the star (*) button on the keypad 1 time
6. Now type in CODE2 we sent you (If phone is still locked with CODE2 try CODE1)
7. Press the # button on the keypad 1 time
9. phone is unlocked!


Model : Samsung i900 Omnia

1. Insert a sim card from a different network.
2. Power ON handset (Make sure wirelesss mode is ON)
3. When asked for code, enter Code 2
4. Now phone should be unlocked
5. If Code 2 not working, try again with Code 1.

Model : Samsung J600

Unlock code is composed like this: #0149*MCK# or #0111*NCK#

1. Press the # button on the keypad 1 time to display #
2. Type the 4 digit code which corresponds to your lock type (in most cases the MCK code will work with code:1)
3. Press the star (*) button on the keypad 1 time
4. Type your unlock code which corresponds to your lock type
5. Press the # button on the keypad 1 time
6. phone should now be unlocked
7, If phone is still locked, you have a 2nd lock activated so please check locks and enter 2nd code


Model : Samsung Z320i, Z510i, Z650i

Unlock code is composed like this: **CODE#

1. Switch ON your phone with a not Accepted SIM Card
2. Compose **CODE#


Model : Samsung i560
Unlock code is composed like this: #pw+CODE+1#

1. Press the # button on the keypad 1 time to display #
2. Press the star (*) button on the keypad 3 times quickly to display p
3. Press the star (*) button on the keypad 4 times quickly to display w
4. Press the star (*) button on the keypad 2 times quickly to display +
5. Now type in the 15 digit CODE we sent you via email
6. Now press the star (*) button on the keypad 2 times quickly to display +
7. Press number 1 on the keypad 1 time
8. Press the # button on the keypad 1 time
9. phone is unlocked!


All other Samsung

1 - Switch ON your phone with a not Accepted SIM Card,
2 - Phone will ask for "Password",
3 - You can now enter the Unlock Code we send to you.

OR (if phone show "Insert Correct SIM Card")

1 - Switch ON your phone with a not Accepted SIM Card,
2 - Compose : #0111*CODE#



"PHONE FREEZE: SIM Unavailable":

 
If your phone displays this message or similar when inserting an incorrct sim, you must obtain the Defreeze code from us an do the following:
1. Power on phone with wrong sim inside so phone displays "Phone Freeze, SIM unavailable. Please contact service provider"
2. Now type CODE1 (defreeze code) that we supplied you and press "OK", "Confirm" or the center button  (no digits will be seen on display when entering this code)
3. Now phone will ask you for Network Code, so enter CODE2 (unlock code) and press OK.
4. If nothing happens when you enter CODE2, you will need to compose code like this: #7465625*638*CODE2#
5. Now your phone should be unlocked.

N.B. If phone does not accept CODE2, and still have no luck with #7465625*638*CODE2# please try step 4 using CODE1  

 


Unlock Instruction for FIDO Samsung i616 Jack


1. Power ON your phone with a FIDO SIM Card that the phone is locked to
2. Type #7465625*638*
3. Network Lock Screen appear, enter UNLOCK CODE
3.  Device is now unlocked

 

How to Enter Unlock Codes on Samsung Z105 and Z107:

    Switch ON your phone with a not accepted SIM card
    Compose : #7465625*638*YOURCODE# (by "yourcode" I mean the unlock code we gave you)


How to Enter Unlock Codes on Samsung Z510 and Z320i:

    Switch ON your phone without SIM Card
    Compose : **YOURCODE# (by "yourcode" I mean the unlock code we gave you)


How to Enter Unlock Codes on Samsung 3G, Zxxx & Dxxx, A707, Series:

    Switch ON your phone without SIM Card.
    Compose : #7465625*638*YOURCODE#  (or *#7465625*638*CODE#) (by "yourcode" I mean the unlock code we gave you)

 

How to Enter Unlock Codes on Samsung (all other models):

    Switch ON your phone with a not accepted SIM card
    Phone will ask for the "Password"
    You can now enter the unlock code


OR

 
    Switch ON your phone without a SIM card (if this doesn't work try with a non-accepted sim card first and if necessary an accepted sim card)
    Compose : #0111*YOURCODE#  (by "yourcode" I mean the unlock code we gave you)


To solve "Phone Freeze" or "Return for service problem"

 
Insert other operator SimCard.
Enter "freeze" Code(it will not be visible) and accept with OK key

(if you purchased our Samsung manufacturer method, then the "freeze"
code is the 2nd code, 1st code is the unlock code)

OR

1. Turn phone on with an unaccepted simcard
2. Screen will display "Phone is freeze / SOS"
3. Type the unfreeze code (Nothing will show on screen)
4. Hit the "Enter Button" as shown in picture below
5. Phone will ask for the Network lock code
6. Enter it as you have received it (or as your unlock software is showing you)
7. Phone will be unfreeze and unlocked

 

 

iPhone Factory Unlock (ALL MODELS / VERSIONS) - Instructions

 

Please follow these instructions in order to Factory Unlock your iPhone:

- Insert your new SIM card (Different Carrier SIM than the phone is locked to)
- Turn Wi-Fi ON and connect to your Wi-Fi Network
- Wait for the "Activation Required" to pop up (10 - 30 seconds)
- Reactivate iPhone
- Your iPhone is Unlocked!

OR

- Install latest version of iTunes
- Make sure phone is updated to the latest official version from iTunes
- Connect phone to iTunes with not accepted (not valid) SIM card
- Wait until iTunes detects phone
- Now disconnect phone and reconnect after 10 seconds.
- Phone is Unlocked.


NOTE : This is the only "lifetime" unlock solution for Apple iPhone as the IMEI is registered as "Unlocked" in Apple database. Your phone will always be unlocked even after each new update of your phone firmware!

 

 

BlackBerry BB10 (Newer Models) - Unlock Instructions:

 

Instructions:


To get started, from the home screen, swipe down from the top to show the options menu

1. Press the settings icon.

2. From the Settings screen select "Security and Privacy".

3. From the "Security and Privacy" screen select "SIM Card".

4. Look for a button labeled "Unlock Network" and press it.

5. On the 'SIM Security' screen, the number of attempts remaining is written in red.
Warning! You have a total of 10 tries to enter your unlock code.  If you use up all 10 tries your phone will be permanently locked! If you have less than 5 tries left, please contact support before continuing.

6. Enter the 8 or 16 digit unlock code that you received via email and press "OK".

7. Your code will be accepted and you should see the section displayed in this image.

 

Find your Blackberry's MEP ID - FOR MEP BLACKBERRY UNLOCK CODES ONLY - IF WE REQUEST THIS.

Some carriers use multiple MEP IDs for their BlackBerrys, so it is important that you find your BlackBerry's specific MEP ID.
Finding this number on your BlackBerry will allow us to generate an unlock code with 100% accuracy. 

THE MEP IDs ARE NOT THE UNLOCK CODES! YOU MUST PROVIDE US BOTH THE IMEI AND MEP ID TO CREATE YOUR UNLOCK CODE!
IF YOU GUESS YOUR MEP NUMBER YOU WILL GET AN INCORRECT UNLOCK CODE.

For NEW Blackberry models ONLY: 9320, 9360, 9380, 9790, 9810, 9850, 9860, 9900, 9930 ONLY. DO NOT USE THIS LIST FOR OTHER MODELS!
Please use the following MEP IDs for the models mentioned above as you will not be able to find it on the device. Choose the MEP ID for the carrier that your phone is CURRENLTY LOCKED TO.
DO NOT USE THESE MEP IDS FOR ANY OTHER MODEL THAN THE ONES MENTIONED ABOVE AS WE WILL NOT ALLOW YOU TO RESUBMIT.
FOR OTHER MODELS PLEASE FOLLOW ONE OF THE TWO PROCESSES ON THE PREVIOUS WEBPAGE TO FIND THE MEP ID ON YOUR PHONE:
For 9320, 9360, 9380, 9790, 9810, 9850, 9860, 9900, 9930 ONLY
Is your carrier not in the list? Please contact us with your IMEI, PRD number (PRD is on the sticker behind the battery),
model number, original carrier, and original country and we will expedite your code.


3 Hutchison (UK): MEP-24124-001
A1 (All Countries): MEP-07484-007
AT&T (USA): MEP-04598-005
B-Mobile (All Caribbean Islands): MEP-10129-006 
Bell (Canada): MEP-30218-002
Bouygues (France): MEP-08918-001
Cable and Wireless (all Countries): MEP-10129-006 
Claro (ALL Countries 9320 ONLY!): MEP-11534-010 
Claro (All other Countries and Models): MEP-11534-008
Digicel (All Countries, 9320 ONLY): MEP-14896-006 
Digicel (All Countries): MEP-14896-005
Digitel (Venezuela): MEP-20669-001
Entel (Chile, 9900): MEP-09917-001
Etisalat: MEP-11414-002
Fido (Canada): MEP-23361-001
Globe (Philippines): MEP-07754-001
IUSACELL (Mexico, 9360, 9380, 9860, 9900 only): MEP-24667-002
IUSACELL (Mexico, 9650 9810 only): MEP-24667-004 
Koodo (Canada): MEP-34870-002 
Lime (All Countres): MEP-10129-006 
Meteor (Ireland): MEP-41468-001 
Mobilicity: MEP-31845-002 
Mobinil (Egypt): MEP-07723-007
Movistar (Latin America - IF NOT LISTED BELOW - 9860, 9900): MEP-06041-012
Movistar (El Salvador, 9360 ONLY): MEP-06041-017
Movistar (Equador, 9380 ONLY): MEP-06041-017
Movistar (Mexico - 9360, 9900): MEP-06041-012
Movistar (Mexico - 9380, 9790 ONLY): MEP-06041-017
Movistar (Spain, 9360, 9810, 9790, 9860 ONLY): MEP-06041-012
Movistar (Spain, 9380 ONLY): MEP-06041-016
Movistar (Venezuela, 9360, 9380 ONLY): MEP-06041-017
MTN (South Africa): MEP-04103-002
MTS (CANADA) MEP-24660-003
MTS (RUSSIA) MEP-17568-003
NTT DOCOMO (Japan): MEP-12978-001
O2 (Ireland):MEP-06424-002
O2 (UK):MEP-06424-002
Optus (Australia): ***Please tell us if this works for you!!! MEP-4103-001
Orange (Dominican republic): MEP-07723-007
Orange (France): MEP-07723-007
Orange (Poland): MEP-07723-007
Orange (Romania): MEP-07723-007
Orange (Spain, 9360 ONLY): MEP-07723-007
Orange (Spain, 9900 ONLY): MEP-42490-002
Orange (Switzerland 9900): MEP-07723-007
Orange (UK): MEP-42490-002 
Rogers: MEP-04626-002
SFR: MEP-05277-005
Sasktel: MEP-30218-002
Smartone/Vodafone (Hong Kong): MEP-04103-001
Sprint: MEP-14052-002
Swisscom (Switzerland): MEP-04103-001
T-Mobile (UK ONLY!) MEP-42490-002
T-Mobile (USA ONLY!) MEP-04104-008
Telcel (Mexico): MEP-30669-001
Telus: MEP-14074-004 

****NOTE: Telus has switched some of their 9320 models with Koodo. If you use the MEP-14074-004 and get a code error please reply to the email and we will resend one for Koodo.
Tesco (UK, 9320) MEP-40954-001 
Tigo: MEP-27488-001
Verizon (USA): MEP-15326-002 
Videotron (canada): MEP-33006-002

VIP (ALL COUNTRIES): MEP-07484-007
Virgin Mobile (Canada ONLY!): MEP-30218-002
Virgin Mobile (9810 UK ONLY!) MEP-29080-002
Virgin Mobile (Other Models - UK ONLY!) MEP-29080-003
Vivo (Brazil - 9900): MEP-06041-012
Vodacom (S.Africa): MEP-04103-002
Vodafone (Australia): MEP-11246-002
Vodafone (Egypt): MEP-09070-001
Vodafone (Netherlands): MEP-06812-004 (Use the MEP4 provided)
Vodafone (Spain): MEP-06813-002
Vodafone (UK): MEP-06814-005
Vodafone (Ireland): MEP-06814-005
Wind (canada): MEP-29318-002
Yoigo (Spain): MEP-42517-001

AGAIN! DO NOT USE THESE MEP IDS FOR ANY OTHER MODEL THAN THE ONES MENTIONED ABOVE AS WE WILL NOT ALLOW YOU TO RESUBMIT.

 

UnlockMyPhone.ca Support Team